スピードライト 何に使う?
スピードライトとはカメラ本体に取り付けて使うことができるストロボです。 スピードライトを使うと屋内でも被写体を明るく撮ることができます。 カメラに取り付けたうえで発光部の角度を変えられるので写真の幅が広がります。 角度を変えたいときはバウンスロック解除ボタンを押しながら調節してください。
スピードライトとストロボの違いは何ですか?
そして「ストロボ」は、もともとアメリカのストロボ・リサーチ社の商品名ですが、後に一般化し、現在もフラッシュのことをストロボと呼ぶ人が多いです。 かつて各メーカーは自社製品に「ストロボ」という名称を使えなかったため、「スピードライト」などの呼称が使われています。
バウンスアダプターの効果は何ですか?
バウンス撮影時、ストロボ光を拡散して和らげ、全体を明るくし、被写体の影を抑えます。 ワイドパネルと併用すると、いっそう効果的です。
ストロボは目に悪いですか?
記者会見などでカメラのストロボが多量に焚かれている映像が放映される際、注意喚起のテロップが添えられるようになりました。 これは、激しい光の点滅を目に受けると、光過敏症発作を引き起こす可能性があるからです。 目への影響だけでなくこの発作を起こす可能性もあるため、使い過ぎないよう心がけましょう。
フラッシュのチャージ時間とは?
チャージ時間とは、一度発光したストロボが次に光を発光するまでに必要な充電時間のこと。 ストロボは一度シャッターを切った後は、充電が完了してから次の撮影が可能になります。 もし充電が完了していない状態でシャッターを切ってしまうと、十分に発光することができず、写真が暗くなってしまいます。
スピードライトのガイドナンバーとは何ですか?
ガイドナンバーは、ストロボの最大出力を表す数値のこと。 この数値が大きいほど強く発光し、様々なシチュエーションに合わせたライティングをすることができます。
カメラのフラッシュの回数は?
シャッター以外の寿命としては、フラッシュの回数にも寿命があります。 フラッシュの回数は約1万回程度で限界に達します。 また、カメラにはCCDというものが内蔵されており、これが劣化することがカメラの寿命に関わると言われている場合もあります。
ストロボの発光回数は?
ストロボ的には、1ヘルツは1秒に1回の発光という意味である。 2ヘルツなら 1/2 秒ごとに1回。 100ヘルツなら 1/100 秒ごとに1回。 そして光る回数を決めるのが「Times」。
白飛び なぜ?
白飛びの原因は写真の明暗差です。 カメラというのは人の目と比べると表現できる明るさが狭く、一定以上の明暗差があると明るい部分を全部白にしてしまいます。 これが白飛びの原因です。
ストロボの1/ 1とは何ですか?
ほとんどのストロボでは、1/16や1/8、1/1といったように分数表記であらわされます。 (一部例外があります。) この分数表記において、どのストロボでも統一されているのが1/1が最大発光量だということです。 この分数表記では分子側(左側の数字)は”1”に統一されています。
フラッシュの発光時間は?
ストロボの閃光の発光時間はおよそ1/10000秒(1万分の1秒)程度と言われています。
ストロボが届く距離は?
フラッシュの届く距離=GN÷F値
一般的な内蔵フラッシュの場合、だいたいGN9~12程度なので、仮にF値が4ぐらいだとすると、だいたい2m~3mと想像以上に届かないものなのです。
ストロボのガイドナンバーの目安は?
②「ガイドナンバー」の目安は「40」以上がベター。
ガイドナンバーとは、光がどこまで遠くに届くかを示した数値です。 これが大きくなるほど、発光量が大きく遠くまで光が届きます。 いろんな場面の撮影に使うのであれば、目安としてガイドナンバー「40」以上の機種(条件によって10m前後まで光が届く)がよいでしょう。
カメラ 何年持つ?
一般的には、一眼レフカメラは5.6年で買い替えることが多いです。 一眼レフカメラの寿命というよりは、カメラメーカーは5~10年で修理部品を製造しなくなるため、修理ができなくなってしまいます。
フラッシュ なぜ必要?
フラッシュを使わないと、暗い場所でシャッタースピードが遅くなり被写体がブレてしまうことや、逆光で被写体が暗くなってしまうことがあります。 フラッシュを使うと暗い場所で被写体がブレやすくなるのを防ぎ、逆光でも被写体を明るく撮影できます。
ストロボスコープとはどういう意味ですか?
ストロボスコープとは、普通、規則正しい間隔で強くシャープな光を点滅させる装置のことを言います。 高速で回転するもの(たとえばパソコンに組み込まれたファン)などにストロボスコープの光をあてると、動いているはずのファンが止まって見えます。
ストロボ撮影のISO感度は?
薄暗い場所での撮影はついついISO感度を上げてしまいがちですが、ノイズが発生しやすいのがデメリットです。 そんなときはストロボを使って、ISO100を基準に露出を調節しましょう。 撮影環境にもよりますが、シャッタースピードの目安は1/60〜1/125です。
白飛びがダメな理由は?
白飛びしていると駄目な理由の一つ目は「印刷した時にインクが乗らない」という事。 プリンターで印刷する場合、白インクというものが無いので白い部分は印刷用紙の白がそのまま表現され、白い部分だけインクが乗っていない状態になります。
白飛びしないコツは?
空が白くなる(白飛び)の改善方法明るい場所に合わせて撮影する露出の値を-1≦露出値<0にするシャッタースピードを速くするNDフィルターを使うISO感度を下げるF値を下げるファインダーを覗いて撮影する
ハイスピードシンクロとは何ですか?
High-Speed Sync(ハイスピードシンクロ; HSS)は、光をコントロールすることです。 つまり、HSS なら、その日の天候というよりも、自分のアーティスティックな感覚と意図によって、露出を決めることができるのです。